+86-371-68115566 export@cvalve.com
  • AWWA C504 Rubber Seated Butterfly Valve
  • AWWA C504 Rubber Seated Butterfly Valve
  • AWWA C504 Rubber Seated Butterfly Valve

AWWA C504 Rubber Seated Butterfly Valve

  • Design standard: AWWA C504
  • Face to face length: AWWA C504, flanged in short type
  • Size: 6" - 120"
  • Pressure rating: class 75B, class 150B, class 250B

We're here to help:

Easy ways to get the answers you need.

share with :
  • Overview
  • Full Data
  • Certification
  • Inquiry
AWWA C504 Butterfly Valve, rubber seated, Fusion bonded epoxy coated, or hard rubber lined,  is applied in the water industry, municipal engineering, water conservancy project, drinking water engineering, sea water treatment and desalination.
Design standard: AWWA C504
Face to face length : AWWA C504, flanged in short type
Flange dimension and drill : ASME B16.1(above 72" acc.to AWWA C207)
Size: 6" - 120"
Pressure rating: class 75B, class 150B, class 250B
Applications: water, drinking water, sea water and weak corrosive fluid etc.

Overview:
►1.Sealing system:
L profiled resilient seal ring is fixed on the disc by a retainer ring and bolts, and ensures reliable 0 leakage sealing performance in double direction. Besides, this seal ring can be easily adjusted or replaced on site without disassembling the disc and shaft, and don’t need any special tools at all.
►2.Body seat:
Stainless steel weld and finished body seat ensures long service life.
►3.Disc:
Streamlined disc design verified by finite element analysis ensures the higher strength and the lower flow resistance
►4.Shaft:
We provide a dry working condition for shaft to keep the corrosion away from the service medium. The key design points as below:
a.The shaft is unexposed;
b.Double seal rings on the shaft bearings to prevent the medium entering the shaft
►5.Shaft connection:
Disc and shaft are connected by key or taper pin connection.
►6.Bearing system:
Self lubricating bearing reduce shaft friction and operating torque, these bearings keep the disc in center and prevent axial movements.
►7.Shaft packing:
For the shaft packing, we could supply with PTFE braided packing. That will make the adjustment and replacement on line easier and safer without disassemble the actuator.
►8.Top flange:
Valve is equipped with ISO 5210 top flange for all types of actuator connection

Name

Material

Body

ASTM A536 Grade 65-45-12

Disc

ASTM A536 Grade 65-45-12

Shaft

ASTM A276, Type 304/316

Disc seal ring

EPDM

Body seal ring

ASTM A276, Type 304/316

Shaft bearing

PTFE lined

Retainer ring

ASTM A276, Type 304/316

Packing

Rubber EPDM or PTFE

O ring

EPDM

Pin

ASTM A276, Type 304/316


We could provide the valves in other materials, such as carbon steel, stainless steel, aluminium bronze, nickel base alloy etc.
Size: 6" - 120"
Pressure rating: class 75B, class 150B, class 250B
Coating: fusion bonded epoxy coating, for medium, such as sea water, we can provide rubber lining type.
Applications: water, drinking water, sea water and weak corrosive fluid etc

[!-----empirenews.page--]

[!-----empirenews.page--]

[!-----empirenews.page--]

[!-----empirenews.page--]

Inquiry
  • Name
  • Tel (with country code)
  • E-mail*
  • Inquiry *